Open a web browser and type the default gateway IP address: 192.168.1.1 (or 192.168.0.1 ).
“First – delete all WAN connections except TR069. Then click ‘Add’.”
Power off both the ZTE F689 and your new third-party router. Unplug the Ethernet cable from your computer. zte f689 bridge mode exclusive
Select if your ISP assigns IPs automatically.
Once inside the user interface, locate the network profile map to save critical configuration details. Open a web browser and type the default
Re-create separate WAN profiles on the ZTE F689 specifically marked with the service lists for VOIP or OTHER , binding them strictly to their respective hardware ports (like LAN2 or LAN3). If you run into issues during setup, let me know: Who is your ? Does your ISP require PPPoE credentials or a VLAN ID ?
You will see a list of WAN connections. Look for the one named INTERNET , TR069 , or VOIP . Unplug the Ethernet cable from your computer
Connect that cable from of the ZTE F689 to the WAN (Internet) Port of your personal router.
Because DHCP is disabled on the bridged gateway, you cannot access its interface under normal conditions. To log back into the ZTE F689 later, assign a static IP address (e.g., 192.168.1.50 ) to a computer's ethernet port, connect directly to LAN port 2 of the ZTE, and type the gateway IP into your browser. To help optimize this setup for your network, please share: The name of your The brand/model of your secondary router
Standard user accounts provided on the sticker of the physical ZTE F689 chassis usually lack the permissions required to alter WAN connection profiles. You need access to the administrator account (typically using usernames like admin , telecomadmin , or adminftp with regional, firmware-specific passwords).
Click and save the file to your computer. If something goes wrong, you can upload this file to restore your original settings. Step 3: Configure the WAN Connection to Bridge Mode