Mindray Bc 2800 Vet User Manual __link__ Jun 2026

Chemically breaks down red blood cells to allow hemoglobin measurement and shrinks leukocytes to enable 3-part differentiation.

Run veterinary-specific controls at the start of every shift or when changing reagent lots.

: The system detects particles in the diluent or rinse solutions during startup.

Requires only 13µL of whole blood , making it ideal for small or fragile animals. mindray bc 2800 vet user manual

Check for bubbles in the lines. Run a cleaning cycle to refresh the fluidic bath. Ensure the lyse reagent is flowing correctly. High Background Count

| | Specification | | :--- | :--- | | Sample Volume | 13 µL (whole blood), 20 µL (pre-diluted) | | Throughput | Up to 25 samples per hour | | Data Storage | 10,000 sample results (including histograms) | | Display | 8.4" (7.8") Color LCD, 800x600 resolution | | Printer | Built-in thermal printer (external printer optional) | | Power Requirements | AC 100-240V, 50/60Hz | | Dimensions (W x H x D) | 322 mm x 437 mm x 386 mm | | Weight | < 23 kg | | Linearity/Precision | WBC: 0.4-99.9 (CV ≤ 3.0%); RBC: 0.20-16.99 (CV ≤ 2.0%); HGB: 3-250 (CV ≤ 2.0%); PLT: 10-2999 (CV ≤ 6.0%) |

Perform a shutdown procedure to rinse the fluidic system with probe cleanser. Wipe Block Cleaning: Check and clean the wipe block if dirty; replace if aged. Aperture Maintenance: functions to clear clogs in the WBC/RBC apertures. Professional Service: Chemically breaks down red blood cells to allow

Disclaimer: This article is an operational overview. For detailed technical specifications, safety warnings, and warranty information, always refer to the official Mindray BC-2800 Vet User Manual provided by the manufacturer.

Keep relative humidity between 30% and 85%, non-condensing.

To maintain trust in your clinical data, regular calibration and QC checks are mandatory. Requires only 13µL of whole blood , making

Maintain an ambient operating temperature of 15°C–30°C and relative humidity under 85%. 3. Daily Operation Workflow

The system automatically performs a fluidic rinse and electronic self-test.

Only qualified personnel should operate the device. Reagents: Avoid direct contact with diluent and lyse.

Note: If the analyzer shows a "Clog" error, run the aperture clean program (burn or zap function) multiple times. 5. Troubleshooting Common Issues