If DHCP is broken on your router:
Connect a monitor and keyboard directly to your Unraid server. Press Ctrl + Alt + Delete or type powerdown into the command line interface to initiate a safe shutdown.
Are you using (NICs) or a custom 10Gb card ? Did this happen right after updating your Unraid version ? Share public link unraid reset network settings install
Remap the MAC address to eth0 , then reboot.
If you still have access to the web GUI but your networking is acting erratically—or you just want to revert a complex bond/bridge setup back to standard defaults—you can do it from the interface. Navigate to the tab in the top menu. Click on Network Settings . If DHCP is broken on your router: Connect
Wait for all status lights to turn off, ensuring the system is completely powered down. Step 2: Remove the Flash Drive Pull the USB boot flash drive out of the server.
Here’s a helpful article on resetting network settings in Unraid, especially useful if you’ve changed something that broke access to the web GUI or if you’re moving the USB drive to different hardware. Did this happen right after updating your Unraid version
After resetting your network settings, you'll need to install a new network configuration. Here's how: