Every time you reset the counter, the pad gets fuller. After 2-3 resets, the pad will become completely saturated. At that point, ink can leak out of the printer’s vent holes, ruining your desk, carpet, or even the printer’s mainboard.
The alternating flashing red lights should now be gone, and the status monitor on your PC will show the printer is ready. Important Physical Maintenance Warning
: Error messages state "Service Required" or "Parts inside your printer are at the end of their service life."
Check the box for and click Check to see the current usage. epson resetter tool l380
Word of Rahul's success with the Epson Resetter Tool L380 spread quickly among his fellow designers and friends. They too had faced similar issues with their Epson printers, and the tool became a lifesaver for them.
Here’s a ready-to-post guide for the , written clearly for a tech support forum, blog, or social media caption.
"The printer's ink pads are at the end of their service life" appears on your computer. red lights on the printer's front panel are blinking alternately. Every time you reset the counter, the pad gets fuller
Most resetter tools for the L380 are and developed by independent programmers. This is why your antivirus might flag them (more on that later).
: It resets the internal "Waste Ink Pad Counter" to zero, effectively telling the printer it is "new" again.
While Epson recommends sending the machine to an authorized technician, the software lock can be safely wiped at home using an adjustment utility. What is the Epson L380 Resetter Tool? The alternating flashing red lights should now be
| Problem | Solution | |---------|----------| | Tool says “Communication error” | Disable antivirus, use USB 2.0 port, run as Admin. | | Counter resets but error returns next day | The pads are physically saturated – replace them. | | Printer shows “Maintenance box full” | L380 has no user-replaceable box. Follow pad replacement guide. | | Program asks for “Service Code” | Use “100” or “0” – otherwise wrong version of AdjProg. |
Inside the maintenance menu, you will look for the waste ink pad counter option. When you open this, you will see checkboxes for the main pad counter. You should first click the check button to confirm that the counter has indeed reached its limit. If the status shows that the counter is full, you then select the initialize button. A small pop-up will ask for confirmation, and once the process is complete, the software will prompt you to turn off your printer. This is a crucial step. Switch the printer off using its physical power button, wait about ten seconds, and then turn it back on. If successful, the red blinking lights should be gone, and your printer status should return to ready on your computer screen.