Leica Tcr805 Total Station User Manual Work Exclusive · Hot & Authentic

: Measures distance and angles simultaneously, then records data immediately.

RS232 serial port for data transfer to computers or external data collectors. 2. Field Setup and Instrument Levelling

: Uses a visible red laser beam. Designed for inaccessible structures, building facades, overhead wires, or hazardous topography. Standard Topographic Data Collection Navigate to the Main Menu and select Surveying . Ensure the correct active job is selected. Aim the crosshairs at the target prism. Enter the Point ID and Target Height (

Ensure that the optical or laser plummet aligns perfectly with the vertical axis. Set up the instrument over a fine cross drawn on a piece of paper. Rotate the instrument 180 degrees on its base. The laser dot should stay exactly on the cross center. If it tracks a small circle, the plummet requires physical calibration via the adjustment screws on its housing. leica tcr805 total station user manual work

Use the third footscrew to level the Y-axis. Repeat this process until both electronic bubble indicators rest perfectly in the center crosshairs. Step 2: Job Creation and Data Management

Do you need help formatting data for a specific ? Share public link

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Measures distance and angles simultaneously, then records

The TCR805 features diverse measurement tracking capabilities suited for varying field environments. Prism vs. Reflectorless Mode

Standard measurements with a single prism reach up to approximately 2,500m to 3,000m.

Adjust the heights of the individual tripod legs to shift the bubble into the center of the circle. Do not touch the tribrach footscrews yet. Field Setup and Instrument Levelling : Uses a

Calculate the horizontal distance, slope distance, and height difference between two measured points.

: Setting coordinates and horizontal circle orientation.

Would you like a printable one-page quick reference, or help with a specific task (e.g., resection, reflectorless measurement, or data format conversion)?

Fires a visible red laser pointer. Ideal for inaccessible points like roof corners, overhead wires, or cliff faces.

Toggle the EDM mode between (for standard glass targets) and Non-Prism/RL (for reflectorless laser shooting to walls, corners, or inaccessible features). Ensure the correct prism constant ( MMcap M cap M