Power off the printer to lock the settings, then power it back on normally. System Compatibility & Supported Models
Download the archive and extract it to your desktop.
However, it is a tool that demands respect. Using it incorrectly, on the wrong printer model, or without addressing the underlying hardware issue (saturated waste ink pads) can create more problems than it solves. If you have a printer model from the compatible series listed above, and you've prepared the physical waste ink system appropriately, V4718 offers a proven path to restoring your printer to full functionality.
: Resetting the software counter does not physically clean the ink pads. If you reset the counter without replacing the pads, ink may eventually leak from the bottom of the printer.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. canon+service+tool+v4718+updated
This happens after many cleanings or years of use. The printer stops working until the counter is reset (and optionally pads replaced).
The updated V4718 version offers several improvements over older builds like V3400 or V4200:
Press and hold the button (the triangle inside a circle).
While support varies by version, v4718 is frequently used for: , and their regional variants (e.g., MG-Series: Specifically confirmed for models like the Other Series: Power off the printer to lock the settings,
But what exactly is version 4718? Is it legitimate? How does it differ from earlier builds like v3400 or v5000? And most importantly, how can you use it safely and effectively without damaging your printer or voiding your warranty?
Connect the printer to a Windows PC using a (Wi-Fi will not work in Service Mode). Press and hold the Stop/Reset button (red triangle icon). While holding Stop/Reset, press and hold the Power button.
Once your printer is verified to be in Service Mode, follow these steps to execute the reset:
The updated version 4718 is optimized to run natively on environments. To prevent communication dropouts that can corrupt the logic board firmware, users must connect via a direct, physical high-speed USB cable connection; Wi-Fi connections or shared network print servers are not supported . Using it incorrectly, on the wrong printer model,
Broadly supports select models from the iP, MP, MX, and Pro series of the same generation. Operational Requirements
The Canon Service Tool if your printer is turned on normally. You must manually boot the hardware into Service Mode first. Follow these steps carefully:
The standard service mode entry procedure for most Canon printers is:
: The printer must be manually put into Service Mode (usually via a specific sequence of the Power and Resume buttons) before the tool can "see" the device. Windows Environment