The M5 boards utilize specific multi-drop buses to speak to downstream reader boards: Connect the twisted-pair RS-485 wires to Port 1 or Port 2.
Keep high-voltage cables separate from low-voltage reader/communication cables to prevent interference.
Each UPD device needs a unique hardware address (1-127). Use binary DIP switches: lenel lnl3300m5 installation manual upd top
Align the LNL-3300-M5 board with the existing standoff pillars in the enclosure.
[ TB1 Terminal Block Layout ] +---------------------------------------+ | 1 | 2 | 3 | 4 | 5 | 6 | +---------------------------------------+ | GND | GND | GND | VIN | | (Power | (Cabinet | (Power Input) | | Fault) | Tamper) | 12-24 VDC | +---------------------------------------+ The M5 boards utilize specific multi-drop buses to
The Lenel LNL-3300-M5 Go to product viewer dialog for this item.
The LNL-3300-M5 features onboard DIP switches (S1 and S2) and jumpers to define communication speeds, cardholder capacities, and addressing. Adjust these prior to mounting the board. S1 DIP Switch Settings (Baud Rate and Device Address) Use binary DIP switches: Align the LNL-3300-M5 board
is inserted directly into the existing backplane, fitting the same physical footprint.
Configure your computer's IP address to the 192.168.0.x range (excluding .251).