Everstart Battery Charger: 60108m Manual

Once the battery is fully charged, the charger will automatically switch to a trickle charge mode (also known as maintenance mode) to prevent overcharging. 5. Special Modes: Engine Start & Recondition Engine Start (Boost Mode)

Yes. This is called "Float Mode" or "Maintenance Mode." The manual states the charger will monitor the battery and only charge when it drops below a threshold. However, check fluid levels monthly if using a standard flooded battery.

Plug the charger's AC power cord into a grounded electrical outlet. everstart battery charger 60108m manual

Determine your battery voltage (6V or 12V) by reading the label on the battery. Step 2: Connecting the Clamps

Yes, but only if the battery has at least 1.5 to 2 volts remaining. If it reads 0.0V, the charger’s safety logic will not activate. You would need a "manual" charger or a boost from another battery to trick the sensor. Once the battery is fully charged, the charger

Best for maintaining a battery or slow charging to prolong life.

: Aims to reduce battery sulfation. If the voltage drops after the first cycle, the charger may restart the process automatically. Reverse Polarity Protection This is called "Float Mode" or "Maintenance Mode

: Press the large "Charge" button to begin. The charger will automatically switch to maintenance mode once the battery is full. Disconnection

Without the manual, the blinking lights are confusing. Here is the official guide:

Indicates that the battery has reached full capacity. The automatic microprocessors will safely cycle on and off to maintain optimal voltage without overcharging. Step-by-Step Operating Instructions

Getting stranded with a dead car battery is a frustrating experience. Fortunately, the EverStart 60108M 15-Amp Fully Automatic Wheel Charger and Starter provides a reliable way to revive your vehicle, power sports equipment, or marine batteries.