Only official website of TronLink: https://tronlink.org
Link remaining lights in a daisy-chain configuration ( OUT to IN ).
The manual typically arrives as a thin, black-and-white booklet. Visually, it is uninspired but functional. The layout usually follows a standard sequence: Specifications -> Panel Description -> Programming Steps.
Check if the DMX chain is terminated.
Before programming, you must set the correct digital address on your lighting fixtures using their digital menus or DIP switches. The Disco 240 uses a fixed 20-channel spacing protocol.
Adjust the specific attributes of your light (color, movement, brightness). Bank/Scene Buttons:
Navigate to the containing your desired pre-recorded scene using the Bank Up/Down keys.
Programming is the process of creating "scenes" (static looks) and "chases" (moving sequences). A. How to Enter Program Mode
If programming multiple lights, deselect the current fixture, select the next one, and adjust the sliders.
: Select which lighting fixtures you are currently controlling.
Before programming scenes, test manual control:
Leo’s inheritance from his eccentric Uncle Marco was not a pocket watch or a vintage car. It was a cracked, duct-taped binder labeled “Disco 240 DMX Controller Manual.”
Link remaining lights in a daisy-chain configuration ( OUT to IN ).
The manual typically arrives as a thin, black-and-white booklet. Visually, it is uninspired but functional. The layout usually follows a standard sequence: Specifications -> Panel Description -> Programming Steps.
Check if the DMX chain is terminated.
Before programming, you must set the correct digital address on your lighting fixtures using their digital menus or DIP switches. The Disco 240 uses a fixed 20-channel spacing protocol.
Adjust the specific attributes of your light (color, movement, brightness). Bank/Scene Buttons:
Navigate to the containing your desired pre-recorded scene using the Bank Up/Down keys.
Programming is the process of creating "scenes" (static looks) and "chases" (moving sequences). A. How to Enter Program Mode
If programming multiple lights, deselect the current fixture, select the next one, and adjust the sliders.
: Select which lighting fixtures you are currently controlling.
Before programming scenes, test manual control:
Leo’s inheritance from his eccentric Uncle Marco was not a pocket watch or a vintage car. It was a cracked, duct-taped binder labeled “Disco 240 DMX Controller Manual.”
