He crouched by the base of the turntable. First, he checked the proximity sensors. They were clean. He looked at the film carriage. The roll of transparent plastic was jammed, slightly twisted on the spool. A mechanical failure, not a software one.
Before operating the machine in manual mode, ensure the following:
Only authorized and trained personnel should manage operation and maintenance.
: Roughly 715 lbs to 2,000 lbs depending on the specific configuration and battery type. Film Capacity : Standard 20" film roll capacity.
Elias watched the machine work. It moved with a grace that human hands could never replicate—perfectly even layers, tension distributed flawlessly across the load. It was efficient. It was cold. It was perfect.
When the Robot 2001 halts during manual or automatic work, the control panel typically triggers a specific fault state. Likely Cause Corrective Action Active E-stop or triggered bumper. Check for physical obstructions; reset E-stop buttons. Film tearing constantly Sharp pallet corners or excessive tension. robopac robot 2001 manuale work
was Marco's bible for maintenance. He knew that to keep the 395 kg machine gliding across the floor, he had to be diligent about cleaning and lubricating the lifting chains.
The Robot 2001 series is designed to handle versatile packaging needs. Unlike fixed rotary table machines, the self-propelled robot moves around the load, making it ideal for large, unstable, or irregularly shaped products. Autonomous, self-propelled movement.
This was the "manuale work" that nobody talked about in the sales brochures. The robot couldn't save the day; the human had to save the robot.
Houses the stretch film. Depending on the model variant, it features either a mechanical friction brake (FR) or a motorized pre-stretch system (FS) capable of expanding the film up to 250% or more.
for precise technical data, as older machines may have variations in functionality. user manuals - Robopac USA He crouched by the base of the turntable
: Up to 2,500 mm, actively tracked via an integrated infrared or photoelectric photocell sensor.
Ensure the bumper sensor is active to stop the robot upon contact. Conclusion
Since Robopac (now part of Aetna Group) does not publicly host all old manuals:
Battery-powered (24V system) with an onboard or external charger.
This article serves as your complete reference for —covering everything from initial setup and daily operation to advanced programming, error codes, and preventive maintenance. He looked at the film carriage
Only trained personnel should operate the machine.
Check the tension setting and ensure the photoeye (sensor) is clean and detecting the pallet correctly.
The wrapping cycle described in the ROBOT MASTER manual follows a straightforward process.
A: You have an early revision. The manuale for that version uses a sequence of LED flashes to indicate errors. Count the flashes and compare to the table in Appendix B of your manual.
