Bradex Bx60 Battery Charger Manual ((full)) -

Clamp the cable onto a solid, unpainted metal ground point on the vehicle frame. If the battery is outside the car, attach it directly to the negative battery terminal post. Step 3: Powering Up Plug the AC mains cable into a 230V wall socket.

: Put on safety goggles and protective gloves before handling connections.

The BX60 is a charger. You don’t just “hook it up and hope.” Here is the layout you’ll see on the front panel: bradex bx60 battery charger manual

Following these tips will help you get the most out of both your battery and your BX60 charger:

Clamp the cable onto the positive terminal post of the battery. Clamp the cable onto a solid, unpainted metal

If the battery is a conventional wet cell, check that the electrolyte level is not too low (if applicable). 2. Connecting the Charger

[ ] Is the work area dry and well-ventilated? : Put on safety goggles and protective gloves

Check if the charger has a resettable breaker or fuse that may have tripped due to a reverse polarity connection. The Charger Gets Very Hot

The charge is complete when the ammeter needle drops to near zero or the battery voltage reaches the correct level.