Tronxy Xy-2 Pro Firmware Update ((better)) Jun 2026

Tronxy has shipped the XY-2 Pro with different motherboard configurations over time (typically Chitu-based boards like the CXY-V6 or CXY-V10). Installing firmware meant for a different board version will brick your machine. Turn off and unplug your printer.

Updating firmware is a delicate process. Rushing into it without proper preparation is a common cause of "bricked" printers. Take these precautions seriously:

"Print" this file from your SD card. It will save a configuration file to the card containing your original steps for the X, Y, Z, and extruder motors. 3. Step-by-Step Update Process (Official Firmware)

Before updating your TRONXY XY-2 Pro's firmware, make sure you: tronxy xy-2 pro firmware update

Updating the firmware on the Tronxy XY-2 Pro is a standard maintenance procedure used to fix bugs (such as thermal runaway protection), add new features (like BLTouch auto-leveling support), or replace the proprietary board with a standard open-source board. However, the process is risky and varies significantly depending on the specific mainboard version installed in the printer.

After the flash, do not just hit "Print." Calibration is required.

Look for the version number printed directly on the green or black PCB (e.g., ). Note down the chip type (usually an STM32 processor). Step 2: Choose Your Firmware Route You have two primary options when upgrading your printer: Option A: Official Tronxy Stock Firmware Tronxy has shipped the XY-2 Pro with different

Configuring the Configuration.h file for your specific mainboard. Compiling and flashing via USB or SD card. This is recommended for advanced users only. Conclusion Updating the Tronxy XY-2 Pro

Insert the card into the powered-off printer and turn it on. The board bootloader will automatically detect the file and flash itself. The screen may stay blank for up to 30 seconds before showing the Marlin logo.

Never update without saving your original configuration, especially motor step values. Create a text file named backup.gcode . Updating firmware is a delicate process

: Gaining access to "Live Z" adjustment or third-party leveling sensors like BLTouch. 2. Official Stock Firmware Update Official firmware can be categorized into (found on older pre-May 2021 models) and Tronxy's own Marlin-based What Tronxy Firmware do I Have?And How To Change It Dec 20, 2564 BE —

With patience and careful preparation, updating your TRONXY XY-2 Pro's firmware is a challenging but highly rewarding project that can breathe new life into your 3D printer.

Newer firmware versions often fix issues with the auto-leveling sensor (auto-leveling sensor calibration), resulting in better first layers.

Your previous leveling data will be wiped. Home the printer, heat the bed to your normal printing temperature, and carefully calibrate the Z-offset using the paper test.