Adjprog L4150 L4160exe File
: Allows users to read, backup, or copy EEPROM data from the printer.
Resetting the software counter does not physically clean the waste ink pads. If you reset the counter multiple times without changing or cleaning the physical felt pads inside the printer, ink will eventually overflow and damage your desk or the internal electronic circuits of the printer.
Ensure both the and Platen Pad Counter checkboxes remain selected. Click the Initialization button to wipe the data log.
The adjprog l4150 l4160.exe is a powerful tool for extending the life of your Epson EcoTank printer. By resetting the waste ink counter yourself, you save time and maintenance costs, getting your printer back to work in minutes.
: Allows users to input the unique ID of a replacement printhead so the mainboard can calibrate correctly. adjprog l4150 l4160exe
Under the Model Name drop-down menu, choose your exact device model ( or Go to product viewer dialog for this item. ).
Extract the downloaded .zip or .rar archive onto your local storage. Step 2: Running the Adjustment Program
While the adjprog software solves your immediate printer lock-out, it does not physically empty the sponge inside your printer. If you print high volumes frequently, you will eventually face overflow. It is highly recommended to eventually open the bottom service door of your Epson printer , remove the waste ink pads, wash them, and let them dry completely, or—if you are handy—route an external waste ink tank (bottle) to the outside of the printer so ink never overflows inside the chassis again.
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | “Communication error” | Printer not in Service Mode or USB driver issue | Re-enter Service Mode; change USB cable/port. | | “Check model name” | Wrong firmware version or counterfeit tool | Find a tool matching your firmware region (e.g., EU vs. ASIA). | | “Key mismatch” | The .exe requires a license key generator | Look for a “cracked” version or generator application. | | “Initialize failed” | EEPROM write-protected or locked | Try a different version of AdjProg (v1.0.1, v1.1.0, etc.). | : Allows users to read, backup, or copy
Users might encounter issues while using adjprog l4150 l4160.exe , such as:
: Ensure there is no paper jammed and that at least a few sheets of plain paper are loaded in the tray for test prints or nozzle checks. Ink Levels
Open the folder and run AdjProg.exe (or the specific L4150_L4160.exe ).
Under the Port settings, you can either leave it on or choose the specific USB port your printer is plugged into. Click OK . Step 4: Access the Waste Ink Pad Counter Click on the Particular adjustment mode button. Ensure both the and Platen Pad Counter checkboxes
When this counter reaches its maximum capacity, your printer will suddenly stop working, displaying error messages like or blinking red lights.
While the Adjustment Program is a powerful tool, using it carries responsibilities:
Disclaimer: This paper is for educational and technical documentation purposes only. The use of service mode tools should be performed by qualified technicians. Always verify the physical state of waste ink systems before resetting electronic counters.
