Unlike older Infinix phones, the Note 30 Pro has . SP Flash Tool will give a STATUS_SEC_AUTH_FILE_NEEDED error if you try directly.
: Press and hold the Power and both Volume buttons until the screen goes black. Enter Recovery : Immediately press and hold Power + Volume Up .
In the SP Flash Tool, click the green button at the top. The tool is now waiting for a connection.
If your phone is stuck on the Infinix logo or continuously restarting, try a first. Note that this will erase all user data. how to unbrick infinix note 30 pro exclusive
This phone has a tricky . If you get S_BROM_CMD_STARTCMD_FAIL (0x13BE), it means the bypass tool is not working fast enough. Solution:
Watch the bottom status bar in SP Flash Tool. Once a red bar appears followed by a yellow bar, release the volume buttons. This indicates the tool has successfully detected the MediaTek DA USB VCOM port and is writing the firmware.
In the field, click choose and navigate to your Infinix_Unbrick folder. Select the MT6789_Android_scatter.txt file. Unlike older Infinix phones, the Note 30 Pro has
In the field, click "Choose" and select the default MTK_AllInOne_DA.bin file from the SP Flash Tool directory.
by either using a built-in recovery menu or flashing the official stock firmware back onto the device. When a phone gets "bricked," it usually means a software update failed, a root attempt went wrong, or the system crashed, leaving the phone stuck on the Infinix logo or in a constant boot loop.
This forces the Note 30 Pro's PMIC (Power Management IC) to hard reset. Enter Recovery : Immediately press and hold Power
Whether your device is stuck in a boot loop or won't turn on after a failed update, unbricking the Infinix Note 30 Pro Go to product viewer dialog for this item.
If you're stuck in a boot loop after flashing, boot into Recovery Mode (Power + Volume Up) and perform a Wipe Data/Factory Reset .
Extract the SP Flash Tool archive and launch flash_tool.exe as an administrator.