Setup - Smart Pss Pc Nvr

Click the sign or Search to find online devices on your network.

In essence, . DSS Express is designed for larger, more professional installations requiring higher scalability and dedicated server resources.

: Get the software from official sources like the Dahua Wiki. During installation, ensure the PC-NVR component is checked.

From the main menu, click on (found under the Settings section). Click the + Add button in the top-left corner. smart pss pc nvr setup

By installing Smart PSS (a free Video Management Software) on a standard Windows PC, you can create a software-based NVR that outperforms many dedicated hardware units. This guide will walk you through every step—from hardware requirements to advanced configuration—to build a rock-solid Smart PSS PC NVR system.

| Issue | Solution | |-------|----------| | No recording | Check PC-NVR service is running (Services.msc → SmartPSS NVR Service) | | Disk full | Enable auto-overwrite in Storage settings | | Camera offline | Verify IP, credentials, and firewall (allow ports 37777, 80) | | High CPU usage | Reduce FPS in camera settings (e.g., 15 fps) or use hardware decoding | | PC sleep/hibernate | Disable sleep mode → PC must stay on 24/7 |

Now you must add your newly configured PC storage server into the main Smart PSS control panel. Launch the main software application. Enter your master login credentials. Click on Devices from the main menu console. Click the sign or Search to find online

Smart PSS requires you to pre-allocate storage space so it can create a dedicated database matrix for video files.

Customize when and how your system saves video footage to optimize disk space. Inside the PC NVR menu, navigate to the tab. Select the specific camera you want to configure.

: Select and answer three security questions. These are critical for resetting your software password if you forget it. Click Finish to open the main dashboard. Step 3: Add Your NVR to Smart PSS : Get the software from official sources like the Dahua Wiki

of your device, which is typically found on the bottom of the unit or under the P2P settings menu. Auto Search (Local Network) : For devices on the same network, navigate to Auto Search to automatically detect and add hardware. Credentials : The default username is often

Choose your recording type: (continuous 24/7) or MD (Motion Detection).