Thyssenkrupp Levant Stair Lift Installation Manual [top] Full Now

Once the rail is perfectly aligned and straight, use wood screws (or concrete anchors) to secure the mounting feet into the stair treads.

Immediately bolt the mechanical end stops at both ends of the rail to prevent the lift from over-traveling. Step D: Install the Seat Place the seat assembly onto the drive unit’s post.

Have you lost your manual? Click here to request a free, official PDF from TK Home Solutions, or locate an authorized installer in your area.

Before we explore the installation process, it's essential to understand the product. The ThyssenKrupp Levant is a popular model designed specifically for straight staircases. It is also known as the "Homeglide" in some markets. This stairlift is a mobility device engineered to help individuals with limited mobility navigate stairs safely and comfortably. The Levant model is particularly notable for its straightforward design, making it a great option for many homes.

I can provide the exact technical specs or wiring diagrams you need. Share public link thyssenkrupp levant stair lift installation manual full

The (often branded under TKE or HomeGlide ) is a straight-rail stairlift designed for quick installation directly onto the stair treads rather than the wall . Levant Installation Overview

Remove the temporary end-stop plate from the bottom (or top) of the rail.

Let’s break down each section as found in the official documentation.

Slide the drive unit onto the rail from the (the manual warns that top loading damages the overspeed governor). You will hear a distinct "clunk" when the drive pin engages the rack. Verify engagement by: Once the rail is perfectly aligned and straight,

Place the rail on the steps, ensuring a gap of approximately 5 inches (12 cm) between the rail and the wall. Step B: Secure the Mounting Brackets Attach the feet: Slide the mounting brackets onto the rail.

28 inches (711 mm) to allow clearance for the footrest and seat.

| Test | Procedure | Pass/Fail | |------|-----------|------------| | Obstruction | Place a 2x4 on the stair. Lift must stop on contact. | ____ | | Overload | Apply 150 kg (331 lbs). Lift should stall and beep. | ____ | | Seat belt | Pull sharply—must lock. | ____ | | Parking | Fold seat fully. Unit must fit within 10" of wall. | ____ | | Remote | Range test: 15 meters (50 ft) through one wall. | ____ | | Manual lowering | Insert release key, turn 90°. Lift descends at 0.2 m/s. | ____ |

Before diving into the installation, it's essential to understand what the Levant stair lift is. The Levant is a custom-made stair lift designed to help people with limited mobility navigate straight staircases safely and comfortably. It is one of ThyssenKrupp's longest-running product lines, known for its reliability and ease of use. Have you lost your manual

A standard 110V AC outlet must be available near the top or bottom of the stairs to plug in the battery charger. Tools Required: Power drill with masonry or wood bits. Socket wrench set (13mm and 17mm are common). Allen key set. Spirit level and tape measure. 2. Component Overview Your Levant shipment should include: The Drive Unit (Chassis): The motor and battery housing. The Chair: Including the seat, armrests, and footrest. The Rail Sections: Usually two or three aluminum segments.

Lay the rail sections on the floor, ensuring the gear rack is aligned.

Immediately bolt the mechanical end stop blocks back onto both ends of the rail. Warning: Operating the lift without end stops can cause the carriage to drive off the track. Step 5: Mounting the Seat Assembly

: Install charging contacts at the top and bottom of the rail. These must be aligned so the drive unit’s spring contacts touch them when parked. Power Supply

Route the thin low-voltage cable from the charging strips down the back channel of the rail to the DC transformer. Plug the transformer into your dedicated wall outlet.