Hp Fxn1 E93839 Motherboard Specs Jun 2026
Generally PCIe 3.0 compliant, allowing for modern budget or mid-range graphics card upgrades (e.g., GTX 1650, RX 6400).
"FXN1" indicates Foxconn as the original equipment manufacturer (OEM) for HP. CPU Socket and Processor Compatibility
Corsair Vengeance or Kingston HyperX DDR3 1600MHz (2x8GB kit).
HP often uses proprietary 4-pin or 5-pin fan headers. If you connect a standard 3-pin or 4-pin aftermarket CPU cooler or chassis fan, you may encounter a "Fan Not Detected" error during POST (Power-On Self-Test), requiring you to press F1 every time you boot. Final Thoughts for Upgraders hp fxn1 e93839 motherboard specs
| Symptom | Likely Cause | Fix | | :--- | :--- | :--- | | No power, LED off | Dead proprietary PSU or motherboard short | Replace with HP OEM PSU | | 3 beeps, no display | Bad RAM or unsupported memory module | Use only 2Rx8 or 1Rx8 DDR3, no ECC | | 5 short beeps | CPU not supported or BIOS corruption | Clear CMOS (jumper near battery) | | SSDs slow | Running on SATA 2.0 (black port) | Move SSD to white SATA 3.0 port | | GPU not detected | PCIe slot in Gen 1 mode (BIOS) | Update BIOS to latest HP revision |
Elias didn't look up. His fingers were tracing the silkscreened lines of a massive, green circuit board. "It’s not a dinosaur, Mia. It’s a classic. And look at this—pristine condition."
Memory is a straightforward and highly beneficial upgrade for the FXN1. The motherboard has four DIMM slots and officially supports DDR3 RAM at 1333 MHz (PC3-10600), though many users have successfully used 1600 MHz modules, which will simply downclock to the system's maximum speed. Generally PCIe 3
The board utilizes standard unbuffered, non-ECC memory modules.
The FXN1 uses the LGA 1155 socket, which officially supports Intel's second-generation Core processors (codenamed "Sandy Bridge") and, with a BIOS update, some third-generation "Ivy Bridge" CPUs.
The defining characteristic of the HP FXN1 E93839 is its power delivery system. HP often uses proprietary 4-pin or 5-pin fan headers
The is a highly popular, enterprise-grade Original Equipment Manufacturer (OEM) printed circuit board. It is most notably utilized in the reliable HP Compaq 8200 Elite Small Form Factor (SFF) and Convertible Minitower (CMT) desktop series. Engineered for day-to-day business productivity, stability, and mass enterprise deployments, this motherboard features the Intel LGA 1155 socket and the Intel Q67 Express chipset .
Micro-ATX (CMT) or Low Profile/SFF (depending on case). Detailed Component Analysis 1. CPU & Socket (LGA 1155)