Ericsson Mini Link Cli Commands Extra Quality Jun 2026

show radio performance # Displays historical and current performance data show radio inventory # Lists the connected RAU (Radio Unit) part numbers Use code with caution. Modifying Radio Parameters

While tools like MINI-LINK Craft and the Node GUI offer a visual experience, they often have limitations. The Node GUI, for instance, requires a specific license for full functionality and supports only a subset of parameters. The CLI, on the other hand, provides complete, unrestricted access to every feature of the packet radio. It is the default management tool for the majority of MINI-LINK 6352 operations and is essential for advanced IP configuration and deep-level troubleshooting.

The Ericsson MINI-LINK series (ranging from the legacy 6000 series to the modern TN and CN series) is a staple in microwave transmission networks. Managing these nodes is primarily done through the Command Line Interface (CLI), known within the Ericsson ecosystem as or MML (Man-Machine Language).

sync-e quality-level g.811 # PRC source interface ethernet 1 priority 1 exit

GET ODU

MINI-LINK# ping 10.10.10.2 size 1500 count 100 MINI-LINK# traceroute 172.16.0.1 MINI-LINK# arp show # List ARP table

NEW USER NAME=<USERNAME>, PWD=<PASSWORD>, PRIV=<ADMIN|USER>

These are some of the most frequently used commands for checking system status and verifying configurations.

: Returns to the previous mode or closes the CLI session. ericsson mini link cli commands

: Provides status, speed, and error statistics for physical and logical interfaces.

MINI-LINK systems are primarily Ethernet-based. Configuring VLANs, ports, and bridging is critical. show interface eth Use code with caution. View VLAN Setup: show bridge vlan Use code with caution. Create a New VLAN: configure bridge vlan set name exit Use code with caution. Configure Port to VLAN (Untagged/Tagged):

For detailed technical references, professional documentation such as the Ericsson Mini-Link 6600 CLI Descriptions

Modern MINI-LINK nodes (Traffic Node) handle Ethernet traffic via ports and VLANs. show radio performance # Displays historical and current

Are you focusing on or Radio Link configuration?

SET IP ADDR=<IP_ADDRESS>, MASK=<SUBNET_MASK>

The DCN is the management network that allows operations teams to connect to and manage MINI-LINK nodes remotely. CLI commands are used for:

When a hop drops traffic or experiences high bit error rates (BER), use these diagnostic commands. Alarm Management The CLI, on the other hand, provides complete,