Fagor Commercial Dishwasher Cleaning Instructions - Parts Town
Always turn off the main electrical disconnect switch before performing any interior maintenance, descaling, or component inspection.
: Efficiently uses approximately 2.4 liters of water per cycle. Temperature Control : Wash Temperature : Thermostatically controlled at 60∘C60 raised to the composed with power C ( 140∘F140 raised to the composed with power F Rinse Temperature : Guaranteed at 85∘C85 raised to the composed with power C 90∘C90 raised to the composed with power C ( 185∘F185 raised to the composed with power F 194∘F194 raised to the composed with power F ) for sanitization via a thermal stop system.
Drain the machine completely and refill it with clean water.
Open the hood and verify that the scrap filters, pump suction filter, and overflow tube are correctly seated in the wash tank. Close the hood. Turn on the main water supply valve. fagor fi80 dishwasher manual
Add a commercial-grade deliming chemical directly into the wash tank according to the manufacturer’s instructions.
The FI-80 has a safety magnetic switch. If the door isn't perfectly flush, the cycle won't trigger. Power Supply: Ensure the main breaker hasn't tripped. Dishes are Not Drying Rinse Aid: Check if the rinse aid container is empty.
Wipe down the interior walls and door gaskets with a soft, damp cloth.
Place plates face-forward in peg racks. Place cups, glasses, and bowls upside down in flat racks. Do not overlap items. Drain the machine completely and refill it with clean water
Cycle 3 (Long): 180 seconds for heavily soiled pots, pans, and baked-on grease. Step-by-Step Operating Instructions 1. Pre-Start Checklist
Remove and clean the stainless steel filter trays and scrap basket after every meal rush or at the end of the day
Adjust the rinse aid screw clockwise if glasses show water spots. Turn it counterclockwise if glasses show bluish streaks or film, which indicates excessive chemical usage.
The FI80 features a built-in rinse aid dispenser. Using rinse aid is essential for achieving spot-free, sparkling dry dishes. The water hardness level in your area will influence how you set the dishwasher's water softener, which uses salt. To adjust this, you should consult your water supplier or the FAGOR Technical Assistance Service (SAT). Turn on the main water supply valve
Standard FI-80 models rely on a gravity drain. The drain pipe must be lower than the machine's base. If your wall drain is elevated, ensure your specific model configuration includes the optional built-in drain pump (FI-80BD). Operating Instructions
Fagor FI80 Dishwasher Manual: Installation, Operation, and Troubleshooting
Periodically run a cycle with a deliming agent to remove scale buildup, followed by 3–4 fresh-water cycles to rinse. Parts Town Troubleshooting Common Issues
Slide the rack into the dishwasher and close the door completely.
Clean the wash arms; verify the chemical pump operation; check the heater status.
: Often caused by a clogged filter or a kinked drain hose.