Choose from the Model Name dropdown menu. Leave the port selection on Auto Selection or select the specific USB port labeled with your printer's name. Click OK . Step 2: Navigate to the Maintenance Menu
(Recommend consulting official Epson service manuals and safety disposal guidelines for local regulations.)
The blinking red lights should now be gone, and your printer status will return to "Ready." You can click one more time in the software to confirm that the counter values have successfully dropped back down to 0%. Crucial Hardware Warning: Check Your Pads reset eprom epson 1410 adjustment program new
By following these guidelines and using the Epson 1410 Adjustment Program, users can maintain their printer's performance, troubleshoot issues, and ensure optimal print quality.
: Click Particular Adjustment Mode and select Waste ink pad counter from the list. Read and Initialize : Choose from the Model Name dropdown menu
The printer does not have a physical sensor to check how full the pads actually are. Instead, it uses a digital counter that estimates ink usage.
An Epson 1410 is a workhorse. Throwing it away because a digital counter says "time's up" is wasteful and expensive (replacement wide-format printers cost $400+). For the cost of a free (or cheap) new Adjustment Program and 15 minutes of your time, you can restore your printer to full working condition. Step 2: Navigate to the Maintenance Menu (Recommend
: Right-click AdjProg.exe or auto.bat and set the compatibility mode to Windows XP (Service Pack 3) .
One day, without warning, your printer will freeze, display a series of flashing lights (usually the two red ink lights alternating or the paper light flashing), and your computer will display a dreaded "Service Required" or "Parts inside your printer are at the end of their service life" message. Your printer is not broken; it is locked by a digital counter. To fix this, you need to using a new Adjustment Program for the Epson 1410 .
In the dropdown, do not leave it on "Auto Selection". Instead, look through the list and select the specific USB port that mentions your printer model (e.g., USB001 (Stylus Photo 1410) ). Click OK . Step 3: Enter Particular Adjustment Mode
This is where the software shows its age and origin.