Xpenology Dsm 7 Hyperv ((new)) ◎

Use Generation 1 for the broadest compatibility with older bootloader styles, though some newer RR builds support Generation 2 with UEFI.

Start the virtual machine and open the Hyper-V Connection window.

Skip the creation of a Synology Account (QuickConnect will not work reliably on XPenology hardware and can lead to account bans). Configuring Storage Pools Inside DSM, open the main menu and launch . Click Create Now to build a new storage pool and volume. Choose your RAID type:

Select the drives to include in the pool, run the optional drive health check, and format the file system as (recommended for snapshot support and data scrubbing). 7. Hyper-V Performance Optimization for XPenology xpenology dsm 7 hyperv

: Use the Arc Loader or RR Loader , which are designed to support DSM 7.x and offer better compatibility with Hyper-V’s virtual hardware.

You’ll need a modern loader like ARC or AuxXxilium/tinycore-redpill . These are designed to handle the driver complexities of DSM 7.

The installation wizard will initialize the partitions and install DSM 7. This process takes roughly 10 minutes. The VM will reboot automatically during this phase. 6. Post-Installation and Storage Setup Use Generation 1 for the broadest compatibility with

Alternatively, type the IP address assigned to your VM directly into the browser on port 5000 (e.g., http://192.168.x.x:5000 ). Click .

Open a web browser on your host computer and navigate to the displayed IP address (usually on port 7681 ).

Running XPenology DSM 7 on Hyper-V: The Ultimate Self-Hosted NAS Guide Configuring Storage Pools Inside DSM, open the main

Assign a minimum of 2048MB RAM (uncheck Dynamic Memory for initial setup).

: A semi-automated Redpill-based loader specifically designed for DSM 7.x. It offers a guided installation and enhanced hardware support .

Intel or AMD CPU with hardware virtualization (VT-x/AMD-V) enabled.

Modern Redpill loaders automatically inject the basic integration drivers. Ensure your Hyper-V network switch remains configured as an "External" switch so the virtual DSM instance can pull a dedicated IP from your local router, enabling seamless SMB, NFS, and Plex media streaming.

The system will install the OS and reboot several times. This can take 10-20 minutes. Be patient.