Jinka Jk 1351 Driver Software Free

The driver handles the connection, but you need a "brain" to send the designs. The JK 1351 is most compatible with: AnyCut / DragonCut:

If you do not have the disc, download the universal or the FTDI VCP driver from their respective official manufacturer websites. These chips power 90% of Chinese-manufactured cutting plotters. Step 2: Install the Driver Package

The driver creates a virtual COM port (e.g., COM2 or COM3) that allows your computer to "talk" to the plotter. jinka jk 1351 driver software

Long vinyl cuts send massive files that can overflow the plotter's internal cache memory. Ensure your driver properties have Hardware Flow Control (RTS/CTS) turned on, which commands the computer to pause sending data when the plotter buffer is full. Conclusion

| Error Message / Issue | Possible Cause | Troubleshooting Steps | | :--- | :--- | :--- | | (Windows) | Faulty USB cable, wrong port, driver not installed | Try a different USB cable and port. Reinstall the driver. | | Driver is not intended for this platform | Trying to install a 32-bit driver on 64-bit Windows | Download a 64-bit driver or use an alternative method like InkScape/PySerial. | | Plotter not cutting correctly (e.g., incomplete cut) | Incorrect cutting force (Force) or speed (Speed) settings | Adjust the Force and Speed settings on the plotter's control panel. Increase Force slightly. | | Driver installation freezes or fails | Conflicting old driver installation | Use the "Have Disk" method during manual installation to point directly to the .inf file. | The driver handles the connection, but you need

: A popular professional alternative that offers specific driver compatibility for Jinka models. 🛠️ Installation Steps Software for JinKa XE-1351 plotter - PlotCalc 22 May 2025 —

as the device and ensure the COM port matches the one found in Device Manager. Step 2: Install the Driver Package The driver

Use plugins like PlotCalc or XFCut to cut directly from your design software.

Connect the USB cable from the plotter to a standard USB port on your PC (preferably a USB 2.0 port, as they offer better stability for legacy plotters than USB 3.0). Step 3: Identify the COM Port Number