Ensure the gap sensor (which detects the space between labels) is calibrated and positioned roughly 4-5mm from the edge of the label.
Visually inspect the unit for any fluid leaks or loose hardware.
Verify isolation by attempting to restart the machine via the HMI before beginning work. Emergency Stops
The Eme Series 2000 is engineered for precision, durability, and seamless integration into automated workflows. Before beginning installation, review the core specifications to ensure your facility meets the necessary operational requirements. Key Specifications
: Access the menu to define the label length and dispensing speed. The internal memory can store up to 45 different product programs for quick changeovers. Eme Series 2000 Manual
Familiarize yourself with the primary physical modules of the unit:
Secure the chassis to a rigid, vibration-free surface using M6 grade 8.8 steel bolts. Electrical Wiring
| Frequency | Action | Tools Needed | Notes | | :--- | :--- | :--- | :--- | | Monthly | Visual inspection for bulging capacitors | Flashlight | Look for domed tops on electrolytic caps. | | Quarterly | Clean dust from vents and fan | Compressed air, ESD-safe brush | Do not allow fan to spin from air jet. | | Annually | Measure output voltage ripple | Oscilloscope | Ripple should be <2% of rated voltage. | | Every 5 years | Replace all electrolytic capacitors | Soldering station, low-ESR caps | Prevents sudden failure. | | As needed | Re-seat connectors and ribbon cables | Contact cleaner (DeoxIT) | Oxidized pins cause intermittent errors. |
The is a versatile and intelligent label dispenser designed for high-efficiency industrial labeling applications. Controlled by a microprocessor and powered by a stepping motor, this series, often referred to as the EME 2-120 or 2-200, offers robust performance in automated production lines. Ensure the gap sensor (which detects the space
To clear a fault after addressing the root cause, press the key on the HMI keypad. If the error code persists immediately upon resetting, the physical issue remains unresolved, or an internal board failure has occurred. Contact authorized technical support for component-level diagnostics.
Cause: Sudden mechanical overload or short circuit in the output motor.
Disconnects all incoming electrical current for lock-out/tag-out (LOTO) safety procedures.
Connect the microprocessor-controlled unit to the power source and integrate it into the production line control system. 4. Operation and Configuration Emergency Stops The Eme Series 2000 is engineered
Ensure the new label roll is firmly tightened on the adaptor.
Solution: Clean the fan filters and verify the internal cooling fan spins freely. Cause: Loose RJ45 or RS485 data connection cable.
The EME Series 2000 manual outlines straightforward operation:
Directs heat dissipation away from core electronics. Do not obstruct.
Inspect mechanical belts or couplings for signs of cracking or fraying.