Canon Service Tool V3600 ⭐

Finally, release the ON button. The power light should flash a few times and then remain steadily lit. The printer is now in Service Mode. Phase 3: Run the Service Tool v3600

: The most common use for this tool is to clear the "Waste Ink Absorber Full" error (often error code 5B00 or 1700 ). When these pads reach their capacity, the printer locks itself to prevent leaks, and the tool is used to reset that logic after the pads have been replaced.

The tool is also known to resolve common waste ink-related errors on these and similar Canon PIXMA models. Canon service tool v3600

A physical USB cable connecting the printer directly to the PC (Wi-Fi or network connections will not work in Service Mode). Service Mode Button Combination:

Once the printer is in Service Mode and connected to your PC via USB: Open the application. Go to the Main tab. Look for the Print section. Click the Test Print button to print a generic test page. Finally, release the ON button

Turn off the printer using its physical Power button (you may need to press it twice).

You must connect your printer via a USB cable directly to your computer. Wireless/network printing will not work with this tool. Phase 3: Run the Service Tool v3600 :

While holding Resume, press and hold the Power button. Do not release either button.

Resetting your printer's counter requires a precise sequence of events. Follow these steps carefully: Phase 1: Prepare the Printer

: The most common use is resetting the waste ink counter to "0" after cleaning or replacing the physical absorbers.