Actia Psa Xs Evolution: Drivers
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
One cautionary note involves interfaces with serial numbers ending in “/B”. These are “blacklisted” by DiagBox software and will not work with DiagBox versions above 5.29 without a complete reflash. If you encounter an interface that suddenly stops working after a DiagBox update, this may be the underlying cause.
The ACTIA PSA XS Evolution is the gold-standard hardware interface used by mechanics and DIY enthusiasts to diagnose Peugeot and Citroën vehicles. Operating alongside software suites like Lexia 3, PP2000, and Diagbox, this tool requires specific device drivers to communicate with your Windows PC.
Support Windows 10/11 and the latest Diagbox 9.xx (virtual machine version). actia psa xs evolution drivers
Open and expand the Universal Serial Bus controllers (or Actia USB Devices ) section. You should see one of the following strings depending on your firmware version: ACTIA USB PSA Evolution Interface PSA XS Evolution
Which (e.g., Windows 10 64-bit) are you using? What version of Diagbox/Lexia are you trying to run?
Driving the Future: How the ACTIA PSA XS Evolution Empowers Modern Drivers This public link is valid for 7 days
Ideal for legacy standalone PP2000 and Lexia 3 installations.
The most reliable place for genuine hardware drivers is the ACTIA IME Support Portal . How to Install ACTIA PSA XS Evolution Drivers
The Actia PSA XS features several technical specifications, including: Can’t copy the link right now
Navigate to > Advanced options > Startup Settings > Restart .
Never plug the ACTIA interface into your PC before installing your diagnostic software. Run the installer for (or standalone Lexia/PP2000).
Use a tool called PSA Interface Checker . Run the software, click "Activate," and check your firmware version. If you are running Diagbox 7.xx or 8.xx, you may need to flash the firmware down to v4.3.2 or up to v4.3.7 to match the software's expectations. Error: Driver Disappears After Rebooting
The compatibility of your driver depends entirely on the version of Diagbox or Lexia you intend to run.
Modern versions of Diagbox (v7.83 and higher, or v9.xx VM versions) run on 64-bit systems, but they require strict driver signatures. You must often disable Driver Signature Enforcement to install the legacy ACTIA drivers successfully. Step-by-Step Driver Installation Guide
