Wlx-893u3 Manual 〈Cross-Platform〉

sudo mkfs.ntfs /dev/sdX1 # replace sdX1 with correct partition

: Supports SD, microSD (TF), MS, M2, xD, and CF memory cards.

Connects the device to the host computer. Wlx-893u3 Manual

Disable USB selective suspend settings in your computer's Advanced Power Options to prevent the OS from turning off the port. The transfer speeds are very slow.

: If you are using a brand-new drive, it will not appear automatically. You must first format it: Navigate to Computer Management > Disk Management . Locate the "Unallocated" disk. sudo mkfs

A: That is normal. The device uses the chipset’s generic identifier. Only the label on the plastic housing says “WLX-893U3.”

, then press the button quickly once more to confirm. The transfer speeds are very slow

: Includes two additional USB Type-A ports for connecting peripherals like flash drives or mice. Operating Instructions 1. Connecting to a Computer

Connect the USB 3.0 cable to the adapter and an open USB 3.0 port on your computer.

: Compatible with 2.5-inch (44-pin) and 3.5-inch (40-pin) PATA drives. Standalone Disk Cloning

: 2 × SATA ports (2.5"/3.5"), 1 × IDE port (2.5"/3.5").