Motorola Evx-261 Programming Software Link
Configure CTCSS/DCS tones for analog and Color Codes for digital channels.
The software will prompt you to select the COM port corresponding to your FIF-12A cable.
If you have the official CE156 software and required cables, here is the process to program your EVX-261 using the CE156 software on a Windows PC.
Before you open the software, you must gather the correct hardware components to bridge your computer and the radio. 1. The Programming Cable motorola evx-261 programming software
Budget-friendly USB-to-3.5mm direct cables are widely available online. Ensure the cable uses a high-quality chip, such as an FTDI chip , to prevent driver compatibility issues on modern operating systems. 2. PC Drivers
The Motorola EVX-261 is a durable, cost-effective digital two-way radio widely used in commercial industries. To configure its frequencies, privacy codes, and advanced features, you must use the official Motorola programming software. This guide covers everything you need to know about setting up and using the software. Software and Hardware Requirements To program your EVX-261, you need three specific items:
Assign RX and TX frequencies for up to 16 channels. Configure CTCSS/DCS tones for analog and Color Codes
The CE156 software is lightweight and runs efficiently on almost any modern Windows operating system, including Windows 10 and Windows 11. Ensure you have an available USB port and the correct USB-to-Serial drivers installed (typically Prolific or FTDI drivers, depending on your cable). How to Get the Motorola EVX-261 Software
The Motorola (formerly Vertex Standard) EVX-261 is a versatile digital/analog hybrid radio that requires specific software and hardware for configuration www.wirelessradios.com Programming Software: Vertex CE156 The primary software for the EVX-261 is the Vertex Standard CE156 Radiotronics UK
The EVX-261 utilizes a single-pin 3.5mm audio jack for its microphone and speaker, which also doubles as the data port. You will need a paired with a CT-106 cable adapter (3.5mm 4-connection plug). Alternatively, many reputable third-party manufacturers sell integrated, single-piece USB-to-3.5mm programming cables specifically designed for the EVX-261. 2. PC Requirements Before you open the software, you must gather
If you absolutely cannot afford the official software, consider:
Configure CTCSS/DCS tones for analog channels and Color Codes/Time Slots for digital channels.
: A FIF-12A USB Programming Interface coupled with a CT-106 data cable, or a compatible aftermarket USB-to-single-pin programming cable.
Adjust squelch settings, MDC1200 signaling, or 2-Tone/5-Tone decoding for analog operations. Step 6: Write Data to the Radio
Once your changes are complete, click the icon (or Radio -> Download to Radio ).