Equatech Universal Tv Wall Mount 32 To 100 Instructions Portable ⟶

Note: For screens larger than 43 inches, always perform this step with two people.

Insert the mounting bolts with washers through the wall plate and into the pilot holes. Tighten them firmly with a socket wrench. 4. Hanging the TV

Move a stud finder across the wall to locate two adjacent wood studs. Mark the exact center of each stud. Never mount a 32" to 100" television directly into drywall alone; you must secure it into solid wood studs or concrete. Step 3: Install the Wall Plate

Universal pattern (ensure you check your TV's manual for specific millimeter measurements between mounting holes). Home Bargains Installation Instructions Note: For screens larger than 43 inches, always

By definition, a "wall mount" is meant to be permanent. However, if you need to move your 32" to 100" Equatech mount between a home, an office, or event venues, follow these transport strategies: 1. The Wing-Nut Modification

Test the 8 or 10-degree tilt options before finalizing the locking screws to ensure the best viewing experience from your seating position. Conclusion The Equatech Universal TV Wall Mount (32"-100")

Your product packaging contains the core structural elements: a broad back wall plate, two vertical interface brackets, safety locking screws, and a multi-pack of assortment hardware (M4, M5, M6, and M8 screws). Never mount a 32" to 100" television directly

Place your TV screen-down on a soft, flat surface (like a blanket or rug) to prevent screen damage.

Insert the appropriate screws provided in the kit. If your TV has an uneven back, use the included spacers to ensure the brackets sit flush.

Before drilling, confirm that your television falls within the safe operating parameters of the Equatech Universal TV Wall Mount: 32 inches to 100 inches Maximum Rated Weight: 55 kg (121 lbs) Tilt Capability: Flat ( 0∘0 raised to the composed with power 8∘8 raised to the composed with power downward, and 10∘10 raised to the composed with power Dimensions: H 43 cm x W 36.8 cm x D 1.1 cm capable of handling up to .

Hold the wall plate against the brick or concrete wall, level it, and mark four corner installation holes.

Line up the mounting brackets over the holes on the back of the TV.

Drill holes approximately 2.5 inches deep into the center of the studs using a 3/16-inch (approx. 4.5mm) wood drill bit.

The Equatech Universal Wall Mount is a heavy-duty, low-profile bracket designed to hold virtually any plasma, LCD, or LED TV ranging from 32 inches all the way up to a massive 100 inches. It’s an incredibly versatile piece of kit, capable of handling up to .