Phison Mpall V5.13.0c -

If you are dealing with a faulty drive, I can help you find the correct parameter setup. Let me know: What did ChipGenius or FDIE show? What Flash ID Code or memory vendor was listed?

: Always verify your drive’s controller using ChipGenius (Chip Genius) before proceeding. Do not rely solely on the tool’s auto‑detection.

Extract the ZIP folder to your local drive (preferably directly to C:\MPALL\ ). Phison Mpall V5.13.0c

Flashing firmware carries a risk of permanently bricking your device if done incorrectly. Follow these preparatory steps to guarantee success. 1. Identify Your Controller (Crucial Step)

: This guide is for informational purposes only. Using mass production tools may void your warranty and carries inherent risks. The author and content providers do not assume responsibility for any damage to your hardware or data. If you are dealing with a faulty drive,

Match this to your ChipGenius readout (usually left at default).

Unplugging the drive midway through the flashing process can permanently ruin the controller chip, rendering the drive completely unfixable. : Always verify your drive’s controller using ChipGenius

| Error | Meaning | Solution | |--------|---------|----------| | 0x1042 | Flash ID mismatch | Wrong IC Type or firmware. Try Auto or different series. | | 0x1106 | Low-level format fail | Use Erase All Blocks + Low Level Format . Try different USB port (2.0). | | 0x4023 | ISO too large | Reduce ISO size or switch to mode 2 (public only). | | 0x1025 | Timing DLL error | Copy IDBLK_TIMING.dll from another MPALL version. | | Red bar, no code | Driver conflict | Uninstall USB drivers in Device Manager, restart, retry. |

Formats and restores drives that Windows identifies only as "RAW."

V5.13.0c is a modern iteration of the MPALL (Mass Production Alliance) suite. It primarily supports newer Phison controllers like the PS2251-11 (U11)