Carquest Battery Charger Cq 80cr Manual |top| -

Indicates the charger is active and charging the battery.

However, based on the model number and typical Carquest charger designs from that era, here are the you would find in the CQ 80CR manual:

Connect the clamp to a clean, unpainted metal part of the vehicle frame or engine block, away from the battery, to avoid sparks. Settings: Set the voltage switch to match your battery ( 6V or 12V ). carquest battery charger cq 80cr manual

Working with lead-acid batteries carries inherent risks of explosion, chemical burns, and electrical shock. Always follow these rules: Wear safety goggles and protective gloves.

Designed for standard lead-acid batteries; not suitable for NiCad or other chemistry types. Indicates the charger is active and charging the battery

When you first connect a deeply discharged battery, the needle will jump to the selected rate (e.g., 40A). As the battery charges, the needle should slowly fall toward 0A. This is normal.

If the engine does not start, unplug the charger, let the unit cool for 45 to 60 seconds, and try again. Working with lead-acid batteries carries inherent risks of

Set the switch to the 80-Amp setting.Turn the charger on for two minutes to boost the battery.Try to crank the engine for no more than 5 seconds.If the car does not start, let the charger cool for three minutes before trying again.

🆗 Carquest Battery Charger Cq 80cr Manual - Google Drive. Google Docs

Keep flames, cigarettes, and sparks far away from the battery testing area. Operating Instructions Step-by-Step