Gemel Txshs User Manual Guide

To trigger the alarm manually, press and hold Button 1 for several seconds. Removing the Motion Sensor:

Activate the alarm using Button 1 (knurled) and deactivate with Button 2 (smooth).

Download → [link] Questions? → @GemelSupport Gemel Txshs User Manual

: Turn the ignition key back to the OFF position.

Insert the physical transponder key directly into the ignition cylinder and rotate it to "Run" while the engine kill switch is in the active position. The factory immobilizer ring reads the key chip and automatically disables the alarm. Toggling Auto-Arming (Passive Arming) To trigger the alarm manually, press and hold

Note: This feature typically immobilizes the engine but does not lock the doors or activate volumetric sensors to prevent locking keys inside. 4. LED Diagnostic Indicator Codes

Replace the battery, ensuring the positive (+) side is facing upward. → @GemelSupport : Turn the ignition key back

The Gemel Txshs features an intuitive interface that makes it easy to navigate and access various features. The interface is divided into several sections:

Note: For specific coding procedures, it is recommended to check the specific car or motorcycle manual, as the procedure varies between a Maserati 4200 and a BMW motorcycle. Troubleshooting No Response

This article serves as a comprehensive guide, functioning as a user manual for operating, troubleshooting, and maintaining the Gemel TXSHS remote transmitter. 1. Getting to Know Your Gemel TXSHS Remote