Remove the NVMe SSD and install it into an external NVMe-to-USB enclosure, or plug it into a different computer.
Aggressive power-saving states can occasionally cause the PCIe link to drop permanently, leading to a device timeout error.
Power on the system and repeatedly tap the to enter the BIOS Setup Utility. Navigate to the Exit or Main menu tab. Select Load Setup Defaults , Restore Defaults , or press F9 .
Insert the drive into an external . Plug the enclosure into a functioning secondary computer. hp nvme ssd -313- error
This means your BIOS/UEFI can no longer locate the operating system, or the drive itself has stopped responding. Common Causes of the -313- Error The SSD has shifted slightly in its slot.
Unscrew the mounting screw, gently pull the SSD out, and firmly slide it back into the slot. Tighten the screw and close the case. 3. Update BIOS via USB
Your NVMe SSD is physically healthy. The issue is likely related to BIOS configurations or Windows corruption. Remove the NVMe SSD and install it into
Unscrew the retaining screw and gently pull the SSD out of its slot at a 30-degree angle.
Look for or Storage Device Configuration .
Incorrect BIOS settings can prevent the NVMe drive from being detected. Navigate to the Exit or Main menu tab
In this article, we will dissect exactly what error 313 means, why it happens specifically to HP NVMe SSDs, how to recover your data, and—critically—how to fix the error or replace the drive.
Firmly slide the SSD back into the M.2 slot, push it flat, and re-secure the screw. Assemble the case and check if the drive is recognized. Data Recovery and Replacement Considerations
To prevent the -313- error in the future, ensure your laptop's cooling vents are clear to prevent thermal stress on the storage controller and keep your BIOS updated through the HP Support Assistant app.