Intronics Digital Room Thermostat User Guide Direct

If you have a DT series wired control, the installation process is similar. However, note that the DT08 model uses only a 2-wire cable between the main control unit and the display panel, which simplifies the wiring process.

Display blank or flashing:

When the battery icon flashes, replace with 2x AAA alkaline batteries (non-rechargeable). Settings are usually retained for 1–2 minutes during change.

To set the current time and day:

Intronics digital room thermostat line, produced by Intronics Co., Ltd. , includes several popular models like the DT-03 Plus Digital Room Thermostat II

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Recalibrate the thermostat by performing a reset (usually a small button located on the faceplate). 6. Maintenance Tips intronics digital room thermostat user guide

. These units are typically used for fan coil systems, mini-split ACs, or chilled water systems. Sangchai Group Basic Operation

Insert fresh AA or AAA batteries (if required) to ensure consistent operation. 3. Programming and Operating Instructions

: Seal any gaps behind the thermostat wall hole where cold air from inside the wall cavity might leak out. If you have a DT series wired control,

Use cable sizes ranging from 0.5 to 1mm² for wiring connections.

The thermostat will maintain this temperature until the next scheduled program period. 4. Understanding Recommended Temperatures

Look for a suitcase icon. This lets you set a fixed, low temperature (like 10°C) for several days while you’re away to prevent pipes from freezing without wasting energy. Frost Protection: Settings are usually retained for 1–2 minutes during