Simplifies maintenance by allowing installers to push firmware patches to a batch of network cameras at the same time.
The Complete Guide to CP PLUS Camera IP Finder Software: How to Locate, Configure, and Manage Your IP Cameras
To use the CP Plus IP Finder software, your computer must be connected to the same physical network or subnet as the surveillance equipment.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Download the CP Plus IP Finder Tool from the official CP Plus world downloads page or authorized distributors like Infosec Solutions .
If your PC is on 192.168.1.X and the camera is on 192.168.0.X , change your PC's IP to a static IP within the camera's range temporarily.
The utility serves as a localized dashboard for surveillance installation, offering features that extend well beyond basic network scanning:
: Typically only used during setup or when the network changes. How to Use It
If the camera has the same IP as another device (like your PC):
Instead of guessing IP addresses or manually configuring every device, this software scans your network topology and presents all connected surveillance hardware in a centralized dashboard. Key Features and Capabilities
: This is a dedicated utility specifically for locating CP Plus cameras on your local network. It allows you to see the current IP address of each camera and is particularly useful if the camera is in DHCP mode and has been assigned an unknown address.
If your PC has multiple adapters (Ethernet + Wi-Fi), choose the active one connected to the same switch as the camera.
The CP Plus IP Finder software is an indispensable tool for anyone installing, maintaining, or troubleshooting CP Plus security cameras and recorders. It eliminates the frustration of manually guessing IP addresses, scanning networks with generic tools, or digging through manuals for default settings. With just a few clicks, you can discover every CP Plus device on your network, modify IP settings as needed, and launch directly into each camera's web interface.
Downloading the tool from the official source is strongly recommended. Third-party websites may bundle the software with unwanted programs or malware.
The tool is especially valuable in these scenarios:
