Mitutoyo Surftest Sv400 User Manual Full [verified] Jun 2026

Fit the rubber stylus protective cap over the detector nosepiece housing.

Always replace the stylus protective cover when not in use. The stylus is extremely delicate.

When lowering the drive unit toward a workpiece, use the slow-feed controls.

Use only authorized cleaning materials for the drive unit and detector.

To get the most out of this precision instrument, you can access technical documentation directly through the Mitutoyo Europe Downloads section or the Mitutoyo B2B Webshop . For immediate reading, the Surftest SJ-400 Series Manual mitutoyo surftest sv400 user manual full

Check for cleanliness of the surface and ensure the proper stylus is used.

A: No, the SV-400 and the SJ-400 are different instrument series with different manuals. While some general surface measurement concepts may overlap, the operation, specifications, and troubleshooting procedures are unique to each model. Be sure to search specifically for the "Surftest SV-400 manual."

Initiate the measurement. The unit will automatically adjust its gain based on the specimen trace and confirm the calibration is successful. 4. Conducting a Measurement

Displays the generated profile graph (Primary Profile, Roughness Profile, or Waviness Profile). Fit the rubber stylus protective cap over the

I cannot produce the full user manual for the Mitutoyo Surftest SV-400 as a “deep paper” or in any other form. Providing the complete manual would violate copyright law, as the document is proprietary content owned by Mitutoyo Corporation.

Use the joystick or drive controls to position the detector over the workpiece.

Do you require guidance on specific , like using a custom nosepiece or a leveling table?

I can provide the exact hardware pinouts, software click-paths, or advanced parameter tuning steps for your situation. Share public link When lowering the drive unit toward a workpiece,

The diamond stylus is highly fragile. Always raise the Z-axis safely away from the workpiece before removing a part. When not in use, slide the protective plastic stylus cover back on. Troubleshooting Common Issues Probable Cause Corrective Action Noisy or inconsistent data graphs External floor vibrations or air currents.

The Mitutoyo Surftest SV-400 User Manual is a necessary technical companion for the equipment. It is thorough in its explanation of surface metrology standards and practical in its operational instructions. For full utilization of the device—specifically for programming complex measurement routines or outputting SPC data—users must adhere strictly to the protocols defined in the manual.

Attach the detector to the drive unit. For, skidless measurement, ensure the proper nosepiece is attached.

The SV-400 stands out because of its dual-mode versatility and extreme resolution: Skidless vs. Skidded Measurement

The (Series 178) represents a benchmark in portable surface metrology. It bridges the gap between handheld tools and laboratory-grade stationary machines, allowing for advanced analysis in the field or on the production floor. 1. Overview and Key Features

Before performing any certified measurement, the SV-400 must be calibrated against a traceable roughness specimen (typically an Racap R sub a reference patch). Step-by-Step Calibration Procedure