Proxxon Lu-6868 Wecker Manual Now

Do not work with damaged or worn abrasive discs. Ensure the disc is perfectly intact.

Use a dry microfiber cloth. Do not use liquid cleaners, as they can seep behind the screen.

While individual tool parameters scale depending on the exact item number (such as the standard PROXXON IBS/E or LWB variants), precision tools built by PROXXON generally feature these design characteristics: Feature Specification Engineering Standard / Range 220V – 240V AC (50/60 Hz) Low-Voltage Systems 12V – 18V DC via dedicated power supplies Spindle Rotation Speed 5,000 to 22,000 RPM (Full-wave electronic control) Head Construction Die-cast aluminum housings for maximum concentricity Collet System proxxon lu-6868 wecker manual

Hope this helps you track it down! 🔍

Press again to transition to the calendar settings (Year, Month, and Day). Use the adjustment keys to change these values sequentially, pressing SET to advance through each unit. Do not work with damaged or worn abrasive discs

| Specification | Detail | | :--- | :--- | | Model Number | 28124 (TBH) | | Working Radius (Throat) | 140 mm | | Worktable Dimensions | 200 mm x 200 mm | | Max. Table-to-Chuck Distance | 230 mm | | Centre Sleeve Lift (Spindle Travel) | 63 mm | | Auxiliary Height Adjustment (Crank) | 70 mm | | Motor | 300 Watt DC motor | | Voltage | 230 V / 50 Hz (EU version) | | Idle Speeds | 1,080 / 2,400 / 4,500 rpm (by belt position) | | Chuck Capacity | up to 10 mm | | Column Material | Chrome-plated steel | | Table Material | Planed, ribbed aluminum die-cast | | Noise Level | ≤ 70 dB(A) | | Effective Acceleration | ≤ 2.5 m/s² | | Weight | Approximately 9 kg |

The TBH 28124 offers two ways to adjust the distance between the bit and the workpiece: Do not use liquid cleaners, as they can

Remove the batteries for 60 seconds, press a few buttons while unpowered to discharge remaining current, reinsert batteries, and reprogram.

Locate the "Mode" or "Time Set" button. Press and hold this for approximately 3 seconds until the digits on the screen begin to flash.