Manual: Amada Digipro

: Perform the first bend on the press brake as programmed.

Press the Zero or Enter button while holding the tool perfectly still. The display should read exactly 90.0∘90.0 raised to the composed with power 0.0∘0.0 raised to the composed with power depending on your specific model’s baseline setting).

The device is typically battery-powered for portability; ensure batteries are checked if the display becomes faint or data transmission fails.

On your Amada AMNC control panel, ensure the angle measurement input is set to DigiPro rather than "Manual Key-in."

The Ultimate Guide to the Amada DigiPro: Operation, Calibration, and Troubleshooting amada digipro manual

The Amada DigiPro is an electronic angle-measuring device used widely in precision sheet metal fabrication. It connects directly to Amada press brake CNC controls (such as the AMNC series) to transmit real-time bend angle data. This eliminates manual measurement errors and drastically reduces setup scrap.

If the DigiPro is dropped, subjected to extreme temperature shifts, or begins giving inconsistent readings, it must be recalibrated. Operators should perform a calibration check at the start of every shift. Step-by-Step Calibration

:

Place the DigiPro on the bent part to capture the actual angle. : Perform the first bend on the press brake as programmed

: Uses standard batteries (often 9V or AA depending on the model). A low battery indicator will usually appear on the LCD when power is low.

Press brakes are powerful machines that require rigorous safety protocols. The DigiPro manual includes essential safety warnings and risk prevention measures that every operator must understand before using the system.

Align the transmitter tip of the DigiPro with the machine’s receiver. Press the button. The angle on the DigiPro screen will instantly populate the correction field on your Amada control screen. Step 5: Apply Correction

Two precision-ground straightedges that contact the bent material. If you share with third parties

Located at the pivot point to calculate the exact angular displacement.

The is an indispensable tool for modern sheet metal shops looking to maximize quality control. By following the guidelines in the Amada DigiPro manual , operators can ensure precise measurements, reduced setup times, and high-quality finished products.

The core component containing precision rotary encoders and contact blades that rest against the bent material.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.