Xycd60 Manual [hot]

Refer to these diagrams when planning your installation.

The voltage at which the controller turns off in charging or turns on in discharging.

is a dual-mode battery charging and discharging controller module designed for DC 6V–60V systems. It functions primarily as a voltage-sensitive relay to protect lithium or lead-acid batteries from overcharging and deep discharging. RoboFactory 1. Key Technical Specifications Operating Voltage: DC 6V to 60V. Modes of Operation: Charging Mode ( ) and Discharging Mode ( xycd60 manual

Short press or long press the UP/DOWN buttons to increase or decrease the parameter values.

This comprehensive guide serves as a complete resource to help you understand both of the primary devices that use the "XYCD60" label, providing detailed instructions for the most common and an overview of the Battery Charge Controller module. Refer to these diagrams when planning your installation

The XY-CD60 operates in two primary modes, which can be selected by long-pressing the button. A. Charging Mode (IN)

For , you must connect the battery to the IN terminals. The load connects to the OUT terminals. On most modules, the IN terminal block is physically on the left , but always verify this with your specific unit. It functions primarily as a voltage-sensitive relay to

One night, a storm rolled in, obscuring the sun and demanding every drop of stored energy. Silas watched the LCD. The symbol glowed—the Discharge Mode (P-2) was active, feeding his lights while he worked. As the voltage dipped toward the "dn" limit, the relay clicked—a sharp, mechanical snap that echoed in the quiet room. The XY-CD60 had done its duty, cutting the load to save the battery’s life.

Long press the SET button to enter the parameter setting interface.

) and opens (stops charging) when it reaches the upper limit ( Discharging Mode (