Skip to content Even experienced users encounter issues. Here are top fixes.
This example is based on a standard eMMC Android 10/11 layout with dynamic partitions ( super ). You can use this as a reference or template.
It allows advanced users to resize partitions, such as increasing the system space. 🛑 Security & Safety Warnings
A: No. Even though similar, partition addresses differ. Using a wrong scatter will cause hard brick. mt6765-android-scatter.txt
When working with MT6765 scatter files, you may encounter specific errors due to security protocols or driver conflicts. 1. BROM Error: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030001)
: The exact name of the binary or image file inside the firmware package that corresponds to this partition.
Because MediaTek devices do not utilize a standardized partition layout like Google’s Pixel line or Qualcomm-based devices, the flashing software requires a map to understand exactly where to write specific blocks of data. The mt6765_android_scatter.txt file acts as this map, defining the precise structural boundaries, memory offsets, and target locations of every partition on the device's eMMC or UFS storage. Even experienced users encounter issues
Choose Download Only for simple partition updates or unbricking. Avoid using Format All + Download as it wipes your unique IMEI data blocks.
Without an accurate scatter file, a flashing tool cannot communicate with the device's bootloader. Writing data to the wrong memory address will permanently corrupt the partition table, resulting in a hard-bricked device. Deep Dive into the MT6765 Hardware Architecture
To flash firmware, you must use the MT6765_Android_scatter.txt file in conjunction with the SP Flash Tool. Prerequisites Installed on your PC. SP Flash Tool: The latest version. You can use this as a reference or template
partition_name: boot file_name: boot.img is_download: true type: EMMC linear_start_addr: 0x40000000 physical_start_addr: 0x0 partition_size: 0x2000000 region: EMMC_USER
Flashing firmware can be risky. Always back up your data and ensure you have the correct files before proceeding.
A scatter file is a plain-text configuration file used by MediaTek's proprietary flashing utilities, primarily the .
An analysis of the file reveals it is a critical configuration map used for flashing firmware on devices powered by the MediaTek Helio G35/P35 (MT6765) chipset. This text-based file dictates exactly where each piece of software (partitions like system, recovery, and boot) should be stored in the device's physical memory. Key Components of the MT6765 Scatter File
The specific hex address where the data begins (e.g., 0x0 , 0x80000 ).
