The CAP 2000+ uses an integrated Peltier plate for rapid and accurate temperature control without external baths. The manual provides specific guidelines:
The CAP 2000+ is a cone-and-plate viscometer designed for precise measurements under varying shear rates.
The manual strongly advises that the . If you switch between different spindles (e.g., CAP-01 vs. CAP-10), you must recalibrate the geometry for that specific spindle to maintain accuracy.
To find the manual link for the CAP 2000 Viscometer, you can try the following:
Preheating the instrument for 30 minutes is recommended if it has been off for an extended period. : cap 2000 viscometer manual link
Lower the handle gently—never force the cone onto the plate.
🔎 AMETEK Brookfield has shifted to a digital download format for sustainability. If you cannot find your specific manual in the table above, visit the official Resource Library on the Brookfield website. This hub contains all current documentation, including software manuals for the CAPCALC32 application.
The AMETEK Brookfield CAP 2000+ is a high-performance, cone-and-plate viscometer designed for rapid, small-sample viscosity testing of materials like paints and coatings. It features precise temperature control via an integrated Peltier plate and wide shear rate ranges to support quality control and R&D applications. For the full, direct download of the manual, visit AMETEK Brookfield AMETEK Brookfield CAP2000 Viscometer - AMETEK Brookfield
AMETEK Brookfield has transitioned to a digital download format for all instrument manuals as part of their sustainability initiative. You can access official documentation through the following links: The CAP 2000+ uses an integrated Peltier plate
The main screen shows viscosity in your chosen unit (Poise, cP, Pa·s, or mPa·s), percent torque, temperature, spindle number, and actual speed. If the torque is below 10 % of full scale, the display flashes (under‑range condition). If the torque exceeds 100 %, “EEEE” is displayed (over‑range).
- Manual No. M02-313-I0916
I can provide customized calibration steps or target specific troubleshooting advice based on your setup. Share public link
