Carel Ritcusrg02 Manual Jun 2026

The RITCUSRG02 is configured via a set of parameters accessible through the display and keypad. 3.1 Accessing the Menu

Check the label on the device for the correct voltage input. 3. Configuration and Programming (Parameter Setup)

Реле нагрева и охлаждения CAREL RITCUSRG02

Press and hold the SET button until the display flashes, then use the UP/DOWN arrows to adjust. carel ritcusrg02 manual

Supports NTC or PTC probes and a configurable digital input. Control Modes:

The is a microprocessor-based electronic controller designed for heating and cooling applications. It is part of a family of plug-in relays that provide a simple, cost-effective solution for temperature regulation in refrigeration and HVAC systems, building on the technology of the IR32 Universal series. Technical Specifications

Confirm and save the change by holding the button until ACC (Accepted) is displayed. The RITCUSRG02 is configured via a set of

The Carel RITCUSRG02 is a microprocessor-based digital electronic relay and controller designed primarily for temperature regulation in HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration systems. It is part of CAREL's innovative "plug-in" series, a new generation of electronic controllers built upon the experience and success of previous models like the IR32 Universal. The device offers a robust and cost-effective solution for precise temperature control across various industrial and commercial applications. The model number RITCUSRG02 (or RITCUSR002 ) is likely a specific product code within this series, possibly associated with Rittal enclosures.

The Carel RITC SRG02 manual is a comprehensive guide that provides detailed information on the device's installation, configuration, operation, and maintenance. The manual covers the following topics:

Typically features two control zones (relay outputs) for managing multiple regulation stages, such as a compressor and an alarm or a heater and a fan. It is part of a family of plug-in

Accessing the full configuration menu is password-protected. Only qualified technicians should attempt to change advanced parameters. The sequence to enter the programming mode may vary, but it usually involves:

A very common point of confusion is the difference between the and RITCUSR002 models. The search for RITCUSR002 returns specific results for a temperature controller used in enclosures. While it shares the same fundamental purpose, the RITCUSRG02 is more explicitly described as a general-purpose CAREL electronic relay/controller with a broad feature set, including support for NTC/PTC probes and RS485 communication. It is likely that the RITCUSR002 is a variant with specific OEM firmware, potentially customized for a partner like Rittal. Always verify the exact model number on your device to ensure you are using the correct configuration documentation.

Common functions: